{"id":763,"date":"2021-09-03T14:42:48","date_gmt":"2021-09-03T14:42:48","guid":{"rendered":"https:\/\/mainlywoodwork.com\/?p=763"},"modified":"2022-02-16T18:07:18","modified_gmt":"2022-02-16T18:07:18","slug":"bit-or-collet-stuck-in-your-dremel-3-ways-to-fix-it","status":"publish","type":"post","link":"https:\/\/mainlywoodwork.com\/bit-or-collet-stuck-in-your-dremel-3-ways-to-fix-it\/","title":{"rendered":"Bit Or Collet Stuck In Your Dremel? – 3 ways to fix it"},"content":{"rendered":"\n
Disclosure: This post may contain affiliate links, meaning I get a commission if you decide to make a purchase through my links, at no extra cost to you.<\/em><\/strong><\/p>\n\n\n\n There are several ways a bit, burr or collet can become stuck in a Dremel tool. It does not happen often, but it always seems to happen at the worst possible times. Most of the time, fixing a stuck collet or bit is very simple and can be done in seconds. <\/p>\n\n\n\n In this article, I will show you the three most common scenarios where a bit or collet might get stuck in your Dremel <\/strong>or rotary tool. Hopefully, this helps you and you are back to using the Dremel in no time. <\/p>\n\n\n\n Update: <\/strong>I added two more methods and scenarios for fixing stuck collet or bit in your Dremel. There are now five solutions in this article. <\/p>\n\n\n\n